|
F 340 pH / Temp Meter The F340 is a basic
laboratory system for pH and temperature measurements. Temperature
compensated pH results can be obtained when used with a
temperature probe (ATC) or a 3-in-1 electrode.
|
F 350 pH / Temp / mV Meter The F 350 is
a laboratory system for routine pH, mV (ORP), relative mV
and temperature measurements. Temperature compensated pH
results can be obtained when used with a temperature probe
(ATC) or a 3-in-1 electrode. s due
to lack of water.
|
F 360 pH / Temp / mV Meter with RS-232
Interface and Data Storage The F 360 is a highly accurate
laboratory system for pH, mV (ORP), relative mV and temperature
measurements. Temperature compensated pH results can be
obtained when used with a temperature probe (ATC) or a 3-in-1
electrode.
|
|
F 390 pH / Temp / mV / ISE Meter with RS-232
Interface and Data Storage The F 390 is a fully equipped
laboratory system for pH, mV (ORP), relative mV, concentration
(ISE) and temperature measurements. Temperature compensated
pH results can be obtained when used with a temperature
probe (ATC) or a 3-in-1 electrode. Up to five custom buffers
are supported.
| F
255 pH / Temp / mV Meter The F 255 is a portable, waterproof
system for routine pH, mV (ORP), relative mV and temperature
measurements. Temperature compensated pH results can be obtained
when used with a temperature probe (ATC) or a 3-in-1 electrode.
|
F
265 pH / Temp / mV Meter with RS-232 Interface and Data Storage
The F 265 is a highly accurate portable, waterproof system
for pH, mV (ORP), relative mV and temperature measurements.
Temperature compensated pH results can be obtained when used
with a temperature probe (ATC) or a 3-in-1 electrode. This
GLP/GMP compliant system includes an RS-232 interface to connect
to a printer or a computer. Up to 100 data sets can be stored
for later recall, printing or transfer to a computer. |
|
F 295 pH / Temp / mV / ISE Meter with RS-232
Interface and Data Storage The F 295 is a fully equipped,
waterproof system for pH, mV (ORP), relative mV, concentration
(ISE) and temperature measurements. Temperature compensated
pH results can be obtained when used with a temperature
probe (ATC) or a 3-in-1 electrode. Up to five custom buffers
are supported.
| |
|
