|
| |
Rack-in-Rotor
<Composite Rotor>
Simple rotor rack placement and removal from a super lightweight
rotor make the TOMY "Rack-in-Rotor" system convenient.
This unique rotor system can accommodate up to 72 x 1.5/2.2ml tubes
while providing uniform g-forces using the TMA-300 and stackable rotor
racks. The super lightweight design allows for improved acceleration and
deceleration times - and the TMA-100, the TMA-200, the TMA-300 and the
rotor racks are autoclavable. |
Rotor Racks for
TMA-100 , TMA-200 and TMA-300
For TMA-100 
For TMA-200 
For TMA-300 |
| AR015-24 |
One Rack
Up to two Racks
Up to three Racks |
 |
1.5/2.2ml x 24 tubes
15,000rpm/
20,380xg
Stack three in TMA-300
Stack two in TMA-200
Use one in TMA-100
|
| AR002-64 |
One Rack
Up to two Racks
Up to three Racks |
 |
PCR 8-wells
tube(0.2ml) -strip x 8 lines
Outer:
15,000rpm/
18,120xg
Inner:
15,000rpm/
16,350xg
Stack three in TMA-300
Stack two in TMA-200
Use one in TMA-100 |
| AR004-24 |
One Rack
Up to two Racks
Up to three Racks |
 |
0.25/0.4ml x 24 tubes
15,000rpm/
20,380xg
Stack three in TMA-300
Stack two in TMA-200
Use one in TMA-100 |
| AR005-24 |
One Rack
Up to two Racks
Up to three Racks |
|
0.5ml x 24 tubes
15,000rpm/
19,880xg
Stack three in TMA-300
Stack two in TMA-200
Use one in TMA-100
|
| AR141-08 |
One Rack
One Racks |
 |
14ml x 8 tubes
15,000rpm/
20,380xg
Use one in TMA-300 and TMA-200
|
| AR300-06 |
One Rack
One Racks |
 |
30ml x 6 tubes
15,000rpm/
20,380xg
Use one in TMA-300 and TMA-200 |
| AR140-08 |
One Rack |
 |
14ml x 8 tubes
15,000rpm/
20,380xg
Use one in TMA-300 |
| AR150-08 |
One Rack |
|
15ml TC x 4tubes
15,000rpm/
20,380xg
Use one in TMA-300 |
| AR500-04 |
One Rack |
 |
50ml TC x 4 tubes or
15ml TC x 4tubes
15,000rpm/
20,380xg
Use one in TMA-300 |
| AR501-04 |
One Rack |
|
50ml TC x 4 tubes
15,000rpm/
20,380xg
Use one in TMA-300 |
| PCR96-02 |
One Rack |
*TMA-300 sold Separately |
PCR Plate x 2 Plates
14,000rpm/
15,340xg
Use one in TMA-300 |
|
Fixed Angle
Rotor
Swing-out Rotor
Horizontal Rotor
For MX-201 
For MX-301 |
| Rotor |
Capacity
(ml x places) |
Adapter |
Maximum
Speed
(rpm) |
Relative
Centrifugal Force
(g) |
TMA-20 Fixed Angle |
|
10 x 8
(Round Bottom) |
- |
15,000 |
18,370 |
TMP-21 Fixed
Angle |
|
1.5
/2.2x 18 |
- |
15,000 |
17,610 |
| 0.25/0.4
x 18 |
A-004 |
| 0.5 x
18 |
MA006-01 |
TMA-23 Fixed
Angle |
|
30 x 6
(Round Bottom) |
- |
15,000 |
18,870 |
TMA-24 Fixed
Angle
(with lid) |
|
1.5/2.2
x 24 |
- |
15,000 |
20,880 |
| 0.25/0.4
x 24 |
MA004-01 |
| 0.5 x
24 |
MA006-01 |
TMA-25BH Fixed Angle
(Lid and mounting flange seal) |
|
50 x 4
(Round Bottom) |
- |
15,000 |
19,120 |
TMA-26 Fixed
Angle |
|
1.5/2.2
x 12 |
- |
16,000 |
18,740 |
| 0.25/0.4
x 12 |
MA004-01 |
| 0.5 x
12 |
MA006-01 |
TMA-32 Fixed Angle |
|
14 x 8 |
- |
15,000 |
20,630 |
TMS-21 Swing-out
(Buckets Sold Separately) |
|
1.5/2.2
x 16 |
MO415-04
Buckets |
15,000 |
20,130 |
| 0.5x 20 |
MO406-05
Buckets |
| 0.25/0.4
x 36 |
MO404-09
Buckets |
TMH-21 Horizontal
(Tube Racks Sold Separately) |
|
1.5/2.2
x 36 |
HR022-09
Tube Racks |
15,000 |
17,360 |
| 0.5 x
48 |
HR005-12
Tube Racks |
| 0.25/0.4
x 80 |
HR004-20
Tube Racks |
|
| Note: Some tubes will deform or break at
the rotor's max. speed. Be sure to check the speed tolerances
set by the tube manufacturer or contact Tomy for more
information. |
|
back...
|
